DS-720xHTI-Kx DVR User Manual
183
2)
If the status of the HDD is “Uninitialized,” check the checkbox of the corresponding HDD
and click
Init
.
Step 3
Verify the HDD is detected or is in good condition.
1)
Select
Menu > System Configuration > HDD > General
.
2)
If the HDD is not detected or the status is “Abnormal,” replace the dedicated HDD
according to the requirement.
Step 4
Check if the fault is solved by the step 1 to step 3.
1)
If it is solved, finish the process.
2)
If not, please contact an engineer from our company to further process.
•
Live view stuck when video outputs locally.
Possible Reasons:
—
The frame rate has not reached the real-time frame rate.
Step 1
Check the parameters of Main Stream (Continuous) and Main Stream (Event).
Select
Menu > Record Configuration > Record
, and set the resolution of Main Stream (Event)
the same as the Main Stream (Continuous).
Step 2
Verify the frame rate is real-time frame rate.
Select
Menu > Record Configuration > Record
, and set the Frame Rate to Full Frame.
Step 3
Check if the fault is solved by the above steps.
If it is solved, finish the process.
If not, please contact an engineer from our company for further process.
•
When using the device to get the live view audio, there is no sound or there is too much noise, or the
volume is too low.
Possible Reasons:
—
Pickup/camera cable is not connected well, impedance mismatches or is incompatible.
—
The stream type is not set as “Video & Audio.”
Step 1
Verify the cable between the pickup and camera is well connected, impedance matches, and
is compatible.
Step 2
Verify the setting parameters are correct.
Select
Menu > Record Configuration > Record
, and set the Stream Type to “Audio & Video.”
Step 3
Check if the fault is solved by the above steps.
If it is solved, finish the process.
