HIKVISION DS-2CD2D21G0/M-D/NF Скачать руководство пользователя страница 90

Страница: 90 / 160

DS-2CD2D21G0/M-D/NF User Manual

UM DS-2CD2D21G0/M-D/NF 020319NA

Select from the drop-down list to set the time format and date format.

Select from the drop-down list to set the time format, date format, display mode, OSD size, and OSD color.

Configure the text overlay settings.

Check the checkbox in front of the textbox to enable the on-screen display.

Input the characters in the textbox.

NOTE:

Up to eight text overlays are configurable.

Adjust the position and alignment of text frames.

Left align

right align

, and

custom

are selectable. If you select

custom, you can use the mouse to click and drag text frames in the live view window to adjust their positions.

NOTE:

The alignment adjustment is applicable only to Text Overlay items.

Click

Save

to save the settings.

Configuring Privacy Mask

Purpose:

Privacy mask lets you cover certain areas of the live video to prevent certain spots in the surveillance area from being live
viewed and recorded.

Enter the Privacy Mask Settings interface:

Configuration

Image

Privacy

Mask

Check the

Enable Privacy Mask

checkbox to enable this function.

Click

Draw Area

Содержание DS-2CD2D21G0/M-D/NF

































































































































































Результаты поиска

Содержание DS-2CD2D21G0/M-D/NF

Отзывы:

HIKVISION DS-2CD2D21G0/M-D/NF, Руководство пользователя, Страница: 90 / 160

Результаты поиска

Содержание DS-2CD2D21G0/M-D/NF

Отзывы: