HIKVISION DS-2CD2D21G0/M-D/NF страница 2 Скачать руководство пользователя | Manualshive

Страница: 2 / 160

background image

DS-2CD2D21G0/M-D/NF User Manual

UM DS-2CD2D21G0/M-D/NF 020319NA

1

About this Manual

This Manual is applicable to the DS-2CD2D21G0/M-D/NF Pinhole and Covert Mini Network Cameras.

The Manual includes instructions for using and managing the product. Pictures, charts, images and all other information
hereinafter are for description and explanation only. The information contained in the Manual is subject to change, without
notice, due to firmware updates or other reasons. Please find the latest version in the company Web site.

Please use this user manual under the guidance of professionals.

Legal Disclaimer

TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED "AS IS", WITH ALL FAULTS AND ERRORS, AND OUR COMPANY MAKES
NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY
QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT
WILL OUR COMPANY, ITS DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY
SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES
FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN
CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF OUR COMPANY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES.

REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR
OWN RISKS. OUR COMPANY SHALL NOT TAKE ANY RESPONSIBILITIES FOR ABNORMAL OPERATION, PRIVACY
LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR
OTHER INTERNET SECURITY RISKS; HOWEVER, OUR COMPANY WILL PROVIDE TIMELY TECHNICAL SUPPORT IF
REQUIRED.

SURVEILLANCE LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS THE APPLICABLE LAW.
OUR COMPANY SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE
PURPOSES.

IN THE EVENT OF ANY CONFLICTS BETWEEN THIS MANUAL AND THE APPLICABLE LAW, THE LATER PREVAILS.

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss.

The precaution measure is divided into “Warnings” and “Cautions”:

Notice:

If camera fails to synchronize local time with that of the network, you need to set up camera time manually. Visit the
camera and enter system setting interface for time setting.

«
1
2
3
4
...
»

Содержание DS-2CD2D21G0/M-D/NF

































































































































































Отзывы:

Нет отзывов

Похожие инструкции для DS-2CD2D21G0/M-D/NF

Бренд: L-Sniper Страницы: 12

Бренд: YESKAMO Страницы: 28

Бренд: Varian Страницы: 55

Бренд: X10 Страницы: 4

Бренд: Z-Wave Страницы: 6

Бренд: Z3 Technology Страницы: 5

Smartvest FUSG35000A

Бренд: Abus Страницы: 4

Бренд: Amico Страницы: 4

Бренд: Umirs Europe Страницы: 24

smc Pentax-D FA Macro 100mm f/2.8

Бренд: Pentax Страницы: 12

Бренд: jablotron Страницы: 2

Бренд: ATV Страницы: 8

Бренд: KaiCong Страницы: 44

Бренд: Lightrein Страницы: 20

Бренд: KAYS TECH Страницы: 11

DCC-580D Series

Бренд: D-MAX Страницы: 24

Бренд: ProVisual Страницы: 7

Бренд: Uniden Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды