HIKVISION DS-2CD2D21G0/M-D/NF, Руководство пользователя

Страница: 73 / 160

DS-2CD2D21G0/M-D/NF User Manual
UM DS-2CD2D21G0/M-D/NF 020319NA 72
Figure 72, QoS Settings
2. Configure the QoS settings, including Video/Audio DSCP , Event/Alarm DSCP , and Management DSCP . The valid
value range of the DSCP is 0 to 63. The larger the DSCP value, the higher the priority.
NOTE: DSCP refers to the Differentiated Service Code Point, and the DSCP value is used in the IP header to
indicate the priority of the data.
3. Click Save to save the settings.
NOTE: A reboot is required for the settings to take effect.
Configuring 802.1X Settings
Purpose:
The IEEE 802.1X standard is supported by the network cameras, and when the feature is enabled, the camera data is
secured and user authentication is needed when connecting the camera to the network protected by the IEEE 802.1X.
Before you start:
The authentication server must be configured. Apply and register a user name and password for 802.1X in the server.
CAUTION!
For your privacy and to better protect your system against security risks, we strongly recommend the use of strong
passwords for all functions and network devices. The password should be something of your own choosing (using a
minimum of eight characters, including at least three of the following categories: upper case letters, lower case letters,
numbers and special characters) in order to increase the security of your product.
Proper configuration of all passwords and other security settings is the responsibility of the installer and/or end-user.
1. Enter the 802.1X Settings interface, Configuration > Network > Advanced Settings > 802.1X .