HIKVISION DS-2CD2D21G0/M-D/NF Скачать руководство пользователя страница 89

Страница: 89 / 160

DS-2CD2D21G0/M-D/NF User Manual

UM DS-2CD2D21G0/M-D/NF 020319NA

Click the calendar icon to select the start time and the end time of the switch.

NOTES:

The start time and end time refer to the valid time for day mode.

The time period can start and end on two subsequent days. For example, if you set the start time as 10:00 and
end time as 1:00, the day mode will activate at 10:00 in the morning and stop at 1:00 the next morning.

Click the

Common

tab to configure the common parameters applicable to the day mode and night modes.

NOTE:

For detailed information of each parameter, please refer to Section 9.1.1 Day/Night Auto-Switch.

Click Day tab to configure the parameters applicable for day mode.

Click Night tab to configure the parameters applicable for night mode.

NOTE:

The settings saved automatically if any parameter is changed.

Configuring OSD Settings

Purpose:

You can customize the camera name, time/date format, display mode, and OSD size displayed on live view.

Figure 85, OSD Settings

Enter the OSD Settings interface:

Configuration > Image > OSD Settings

Check the corresponding checkbox to select the display of

Camera Name

Date

, or

Week

if required.

Edit the camera name in the

Camera Name

text field.

Содержание DS-2CD2D21G0/M-D/NF

































































































































































Результаты поиска

Содержание DS-2CD2D21G0/M-D/NF

Отзывы:

HIKVISION DS-2CD2D21G0/M-D/NF, Руководство пользователя, Страница: 89 / 160

Результаты поиска

Содержание DS-2CD2D21G0/M-D/NF

Отзывы: