HikRobot ID5000 Series Скачать руководство пользователя | Manualshive

Страница: 4 / 107

background image

ID5000 Series Smart Code Reader User Manual

iii

2006/66/EC (battery directive): This product contains a battery that
cannot be disposed of as unsorted municipal waste in the European
Union. See the product documentation for specific battery information.
The battery is marked with this symbol, which may include lettering to
indicate cadmium (Cd), lead (Pb), or mercury (Hg). For proper recycling,
return the battery to your supplier or to a designated collection point. For
more information see:

http://www.recyclethis.info

Symbol Conventions

The symbols that may be found in this document are defined as follows.

Symbol

Description

Danger

Indicates a hazardous situation which, if not avoided, will or could
result in death or serious injury.

Caution

Indicates a potentially hazardous situation which, if not avoided,
could result in equipment damage, data loss, performance
degradation, or unexpected results.

Note

Provides additional information to emphasize or supplement
important points of the main text.

Available Model

This manual is applicable to the ID5000 Series Smart Code Reader.

Safety Instruction

These instructions are intended to ensure that the user can use the product correctly to avoid
danger or property loss.

Laws and Regulations

The device should be used in compliance with local laws, electrical safety regulations, and fire
prevention regulations.

Light Source

●

This device has a retinal blue light hazard that belongs to the class II hazard. Do not observe the
device in close range during its operation.

●

The retinal blue light hazard (small light source) of the white light lamp measured at 200 mm is
7.965e0 W/m2, and the hazard limit measured at the minimum safety distance of 570 mm is
9.637e-1 W/m2.

●

Protective measures like wearing safety goggles are required when installing, maintaining and
debugging the device.

●

In the absence of proper protection, you should keep safety distance with the light source, or
avoid direct eye exposure with the light source during device installation and maintenance.

«
...
2
3
4
5
6
...
»

Содержание ID5000 Series












































































































Отзывы:

Нет отзывов

Похожие инструкции для ID5000 Series

Бренд: Magtek Страницы: 245

Бренд: Rocstor Страницы: 2

Бренд: Pepperl+Fuchs Страницы: 27

Бренд: Cino Страницы: 16

Бренд: DeLOCK Страницы: 9

Бренд: AuthenTrend Страницы: 33

Бренд: Datalogic Страницы: 32

Бренд: Shintaro Страницы: 12

Бренд: ITV Страницы: 4

TR22A KNX Series

Бренд: Eelectron Страницы: 2

Бренд: Rosslare Страницы: 52

Бренд: Opticon Страницы: 4

Бренд: Datalogic Страницы: 49

Бренд: Atech Flash Technology Страницы: 18

Бренд: RIOTEC Страницы: 3

Бренд: RIOTEC Страницы: 3

Бренд: Certgate Страницы: 5

Бренд: RIOTEC Страницы: 5

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды