HikRobot ID5000 Series, Руководство пользователя

Страница: 11 / 107

ID5000 Series Smart Code Reader User Manual
2
Figure 1-3 Appearance (Type III)
Table 1-1 Component Description
No. Name Description
1 Lens Cap
It can be replaced with other lens cap. Transparent and polarization lens
cap are optional.
2 Screw Hole
It is used to fix the device to installation position. It is recommended to
use M4 screw.
3 Light Source
It refers to LED lamps providing light for improving code reading effect.
Note
● The default color of LED lamps is white. Red, blue and IR are optional.
● The quantity of LED lamps may differ by device models.
● The light source of type II device supports full polarization, half
polarization, and none polarization.
● The type III device does not have own light source, and you can use an
external light source instead.
4
Gigabit Ethernet
Interface
It refers to gigabit Ethernet interface for transmitting data. The interface is
designed with screw threads to tighten connection between the device and
cable, and thus avoiding influence caused by vibration.
5 12-Pin Interface
It provides power, input/output, and serial port signal. The interface is
designed with screw threads to tighten connection between the device and
cable, and thus avoiding influence caused by vibration.