HikRobot ID5000 Series, Руководство пользователя

Страница: 38 / 107

ID5000 Series Smart Code Reader User Manual
29
are enabled, the polling order is Param3 > Param1 > Param2 > Param4 > Param5.
Steps
1. Go to Image Settings → Image → Polling Enable , and select Multiple as Polling Enable .
2. Set Polling Time and Polling Period according to actual demands.
3. Select 2 to 8 sets of parameters (e.g. Param1 and Param2 ) from Polling Param , and enable
Polling Param Enable to let them take effect.
4. Set Polling Exposure Time , Polling Gain , and Polling Gamma for the Polling Param you selected.
5. Select Polling Light Selector according to actual demands, and enable Polling Light Enable .
6. Repeat step 3 to step 5 to set other parameters from Polling Param .
Figure 8-7 Multiple Mode
Parameter 1
Exposure Time 1
Gain 1
Gamma 1
Lighting 1
Parameter 2
Exposure Time 2
Gain 2
Gamma 2
Lighting 2
Parameter 3
Exposure Time 3
Gain 3
Gamma 3
Lighting 3
Parameter 4
Exposure Time 4
Gain 4
Gamma 4
Lighting 4
Parameter 8
Exposure Time 8
Gain 8
Gamma 8
Lighting 8
Parameter 7
Exposure Time 7
Gain 7
Gamma 7
Lighting 7
Parameter 6
Exposure Time 6
Gain 6
Gamma 6
Lighting 6
Parameter 5
Exposure Time 5
Gain 5
Gamma 5
Lighting 5
Figure 8-8 Polling Diagram