HighLine RCH Hydro, Руководство оператора

Страница: 64 / 101

Section 5 - Maintaining the Mower
Lubrication
Lubricate all grease fittings with a quality
lithium soap compatible E.P. grease meeting
the N.L.G.I. #2 specifications and containing
no more than 1% molybdenum disulfide.
Every 10 Hours
!
Lubricate 3 points on the hitch every 10
hours.
!
PTO - Lubricate 5 points on the PTO
every 10 hours.
- 1 point at the constant velocity joint.
*Continued angled operation will
require lubrication every 4 hours.
- 1 point on each joint collar
- 1 point at the telescoping section
Note: If the grease point in the center
of the PTO (telescoping
section) is not accessible when
connected to the tractor,
disconnect from the tractor and
extend the PTO shaft to
access the grease point.
Every 50 Hours
!
On the optional Steering Control, lubricate
2 points every 50 hours.
- on the left pivot pin
- on the right pivot pin
Grease Steering Control Pivot Pins
215075C
Grease Hitch Points
214050C
Grease Points on PTO
108116C
Page 5-5