HighLine RCH Hydro Скачать руководство пользователя страница 22

Страница: 22 / 101

Section 2 - Transporting the Mower

10.

Attach the hydraulics.

The mower requires 3 remote connections.

If the optional joystick is included, then
only 1 remote connection is required.
-

For  the  joystick  option,  the
hydraulic  lever  will  work  in  only
one  direction.  There  is  a  check
valve on the valve manifold. If the
hydraulics  are  not  working,  move
the lever in the opposite direction.

Clean the end of the hoses (1) and
the connection.

Firmly push the hoses into the tractor
receptacle according to user
preference.

Route the hoses so they do not
interfere with moving parts.

11.

Connect the lights.

Connect the light plug (2) into the
appropriate tractor receptacle.

Ensure the light cable does not
interfere with or contact moving parts.

12.

If the optional joystick is on the
machine, route the joystick cable.

Ensure the cable does not interfere
with or contact moving parts.

13.

Place the hitch jack in the storage
location.

Attach Hydraulics and Lighting

108008C

Page 2-5

Содержание RCH Hydro






































































































Результаты поиска

Содержание RCH Hydro

Отзывы:

Бренды по названию

Популярные бренды

HighLine RCH Hydro, Руководство оператора

Результаты поиска

Содержание RCH Hydro

Отзывы:

Бренды по названию

Популярные бренды