HighLine RCH Hydro, Руководство оператора

Страница: 70 / 101

Section 5 - Maintaining the Mower
Blade Bolt and Fitted Hole
107107C
2. Install the new blades.
- For each blade, place the blade onto
the shoulder of the bolt.
-
The old bolt can be used again if it
is not damaged.
- Ensure the blade is installed with
cutting edge leading (1) into the
rotation indicated by the decal on
the section of the mower deck.
- Align the bolt (1) into the slotted hole
(2) in the pan.
- Slide the bolt into the blade pan.
- Use a new nylon locking nut.
-
Do not reuse the old nut. The
locking nylon nut cannot be
reused.
- Finger tighten the nut.
- Tap the head of the bolt to seat the
bolt into the pan.
- Tighten the nut with a socket from the
top of the deck.
- Tap the head of the bolt again.
- Tighten the nut to 600 lbf (813 Nm).
Blade Mounting Orientation
201104C
Page 5-11