HighLine RCH Hydro, Руководство оператора

Страница: 67 / 101

Section 5 - Maintaining the Mower
Oil Tank Oil Changing Procedures
The hydraulic oil should be changed every
1500 hours (Change oil earlier if there is a
contamination in the hydraulic oil system).
- If a motor or pump fails, drain all the
hydraulic oil to prevent further
co m p o n e n t
d a m a ge d u e t o
contamination. Replace the filter and
fill the system with new hydraulic oil.
To Empty the Tank:
- Close both valves (3) at the bottom of
the oil tank.
- Remove a hose from the one of the
valves.
- Place a container to collect the oil that
will come out of the opened valve.
- Open the valve to allow the oil to drain
from the system.
- To remove the small amount of oil
remaining in the tank, remove the
drain plug from the bottom of the tank.
To Fill the Tank:
- Replace the drain plug into the bottom
of the tank.
- Close the valve (3) at the bottom of
the oil tank.
- Reconnect the hose to the valve.
- Clean the top of the oil tank to prevent
oil contamination.
- Remove the filler cap (1).
- Fill with 50 gallons (190 liters) of
Hydrex MV36 or equivalent hydraulic
oil.
- Check the oil level in the sight glass
on the side of the tank.
- Replace the filler cap (1).
Valves at the Bottom of the Oil Tank
214044C
Check Oil Level After Filling
216055
Remove Filler Cap to Fill Tank
216012C
Page 5-8