HighLine RCH Hydro, Руководство оператора

Страница: 62 / 101

Section 5 - Maintaining the Mower
!
Check the oil filter operating pressure.
Change the oil filter after the first 25 hours of
operation.
Replace the filter every 500 hours or when
the filter condition gauge shows it needs to
be changed.
Note: When the oil is cold, the gauge
may show that the filter needs
replacing. Allow the oil to warm
and check the filter gauge again.
- When the oil is warm, with the pump
running, check the filter pressure
gauge.
- If the gauge is in the green zone, the
filter is okay.
- If the gauge is in the yellow zone, the
filter will need to be replaced soon.
- If the gauge is in the red zone, replace
the filter immediately.
Replacing the Filter
- Loosen the bolts (1) that hold the top
of the filter cap.
- The bolts only need to be
loosened enough to rotate the cap.
- Remove the filter cap.
- Remove the o-ring seal under the cap.
The o-ring seal will be re-used.
- Remove the used filter and discard.
- Install a new 5 micron oil filter.
- Replace the o-ring seal, cap and
fasteners. Tighten in place.
Check Oil Filter Operating Pressure
216054
Remove Cap to Replace the Filter
216011C
Page 5-3