HF PU35, Руководство пользователя

Страница: 7 / 20

3
4.2 Using the Manual
Read this manual before using or maintaining the equipment. Completely familiarize yourself with all
components and how they are used. Please refer to the drawing of the strand jack at the end of this
manual.
[Ref.]
Locate this manual in a place for quick reference during both use and maintenance.
4.3 Installation
The motor is designed for either a 240V 3PH or 480V 3PH power input. Have a qualified electrician
connect the motor to an appropriate power supply.
5.0 MAINTENANCE
Before and after every use, inspect the entire system (including but not limited to hoses, valves, and
fittings). Replace or repair components as needed.
Before and after every use, inspect the jacking sleeve.
[Ref: Illustration 1, item 3.]
Before and after every use, inspect the jam nut to ensure that it is tight. [Ref: Illustration 1, item 19.]
5.1 Daily Maintenance
[1.]
Clean concrete buildup from all components.
[2.]
Inspect the entire system for wear or damage, replacing or repairing if necessary. Wipe off hoses
and inspect them for cuts, wear, kinks, leaks, and worn or damaged fittings. Inspect valves.
[3.]
Inspect cylinder mounting bolts to ensure they are tight.
WARNING
Never use damaged parts without consulting Hamilton Form concerning safety. If there is any doubt,
do not use it!
WARNING
Make sure that the motor is wired to rotate counterclockwise when viewed from the shaft end of
the motor.
WARNING
Always cover the ends of quick-disconnects with the supplied plugs and caps when uncoupled.
Failure to do so could contaminate the hydraulic system.
If the cylinder stops moving due to a blockage in the flow system (hydraulic lock), do not attempt to
relieve the hydraulic pressure by disconnecting hydraulic hoses or fittings. Removing the blockage
could cause the cylinder to suddenly move.