HES HS1102S, Руководство пользователя

Страница: 12 / 35

Hwang Sun Enterprise Co., Ltd. Edition 2012/06 11
5. Turn on the power switch on control panel.
(“ON” position)
6.
REFER TO THE SETTING STEPS TO MAKE
SETTING ON PID TEMPERATURE
CONTROLLER.
7. Put a container under nozzle tip.
8. After all temperature reach the setting value and
hot melt adhesive inside tank is melted
completely, press the “START” button to start
motor. Operate the dispensing nozzle to make
hot melt adhesive inside tank flow out, it may
some bubbles or impurities along with flowed
adhesive.
9. Make sure flowed adhesive without bubbles and
impurities, then stop triggering the nozzle. At the
moment the machine is ready.