background image

Herni

II. Safety instructions

· Before use, the components must be checked for perfect function and  

condition.

· The user manual must always be carried with the child car seat.

· The safety of your child is only guaranteed if the seat is installed correctly and 

if the child is fixed exactly.

· The straps must be laid tight and without twisting.

· The 3-point safety belt is to be guided through the provided belt guides and 

is supposed to surround the seat tightly.

Please check:

    A) whether the seat belt is securely placed in the belt guide

    B) whether the belt buckles are locked correctly

    C) that no textiles are clamped

· Make sure that no solid objects like pens, belt buckles, etc. are placed 

between the child and the seat belt. This could lead to injuries in the 

event of an accident. 

· Explain to your child how important it is to be well-secured and that the 

course of the straps should not be changed. It shouldn't pull on the 

straps, nor open the belt buckles.

· Do not make any changes to the car seat, otherwise you risk your child's 

safety.

· The car seat must not be damaged by moving parts in the car or by doors.

· Never leave your child alone in the child car seat.

· Inform your passengers how your child can be taken out of the seat after an 

accident.

· After an accident, the entire child car seat has to be renewed.

• Page 9 •

Содержание IPAI-LGT





















Отзывы: