4.1 Wedge pillow
Installation instructions:
1. Place the IPAI-LGT on a stable work surface.
2. Now take the wedge pillow as well as the 4
Velcro strips from the packaging.
3. First, remove the white protective film of the
Velcro . Make sure the underside of the car
seat is clean - it must be free of dust and
moisture. Now apply the Velcro strips to the
underside of the seat part - see mark
in figure 3.
4. Now place the wedge pillow exactly on
the Velcro strips. This prevents the wedge
pillow from shifting later in the car.
5. Turn the IPAI-LGT over again. Now the car
seat can be installed in the car.
INFO!
4 smaller instead of 2 longer Velcro
strips are deliberately included. This is
important if an abduction block is used
as well.
ATTENTION!
Please make sure that there is
sufficient head space to the
vehicle roof!
There must be at least a hand
space between the child's head
and the vehicle roof!
Herni
IV. Using the optional accessories
• Page 12 •
fig. 1
fig. 2
fig. 3
