Herni
I. General information
1.3 Relevant information
The IPAI-LGT car seat for disabled children consists of two modules:
1. A standard child car seat from Römer-Britax (please refer to the manufacturer's
manual for use).
2. Adaptation module with accessories, which offers the possibility to equip the car
seat according to individual needs. Please refer to the instructions for use from
HERNIK GmbH.
1.4 Warranty
A warranty can only be accepted if the product is used under the specified
conditions and for the intended purposes. The manufacturer is not liable for
damage caused by components and spare parts which were not approved by the
manufacturer.
1.5 Service and repair
Service and repairs on the IPAI-LGT may only be carried out by specialized dealers.
If you have any problems, contact your local dealer. For repairs you will only
receive original spare parts.
1.6 Practical instructions
The car seat will be delivered fully assembled. Upon delivery, the dealer will instruct
the user how to use the device by using the manual. The specialist dealer should
install together with the user the car seat in the car and, if available, adjust the
Isofix strap or the clamp.
When installing the car seat, it is best to hold it with one hand in the center of the
front and the other at the top. In order to achieve an optimal sitting position, it is
necessary to adjust the car seat individually to the circumstances of the child. This
should always be done by the dealer.
• Page 3 •
