4.2 Abduction block
Installation instructions:
1. Place the IPAI-LGT on a stable work surface.
2. Now take the mounting plate , the two
Velcro strips , and the abduction block
out of the packaging.
3. First remove the white protective film from
the two Velcro strips. Make sure, the undersi-
de of the car seat is clean - it must be free of
dust and moisture. Now apply the Velcro
strips to the underside of the seat part - see
marking in figure 1.
4. Now hang in the mounting plate (see figure
2). The U-profile must be placed on the
plastic edge. The mounting plate must be
placed flat on the underside of the seat part,
whereby the Velcro strips form a connection.
5. Turn the IPAI-LGT over again. Now the
abduction block can be inserted into the
holder and fixed using the rocker arm.
TIP!
If the abduction block is not used, the
mounting plate should be removed.
Otherwise there is a risk of injury due to
protruding metal parts.
Herni
IV. Using the optional accessories
• Page 13 •
fig. 1
fig. 2
fig. 3