4. Place the lap belt (15) also on the other side
of the seat cushion in the light red belt guide
(04).
ATTENTION!
The lap belt (15) must run as low
as possible over your child‘s hips on both sides.
5. Insert the diagonal belt (16) into the dark red
belt holder (03) of the headrest (22) until it is
completely and untwisted in the belt holder
(03).
TIP!
If the backrest covers the belt holder
(03), you can adjust the headrest (22)
upwards. The diagonal belt (16) can now be
easily inserted. Now put the headrest (22)
back to the correct height. Make sure that
the button on the belt holder (03) is
completely closed.
7. Make sure that the diagonal belt (16) runs
over your child‘s collarbone and not against
the neck.
TIP!
You can also adjust the height of the
headrest (22) in the vehicle.
ATTENTION!
The diagonal belt (16) must run
diagonally to the rear. You can regulate the
course of the belt with the adjustable belt
deflector of your vehicle.
ATTENTION!
The diagonal belt (16) must
never lead to the belt deflector on the car. If
this is the case, then only use the child seat in
the back seat.
8. Tighten the vehicle belt by pulling the
diaginal belt (16).
Herni
I. General information
• Page 8 •