4.5 Belts to connect the chest straps
1. Remove the belt end caps . Now thread the
belts out of the belt adjusters
.
2. Now guide the belt through the belt clip as
shown in figure 2. Position the belt at the
height of your child‘s chest. Keep a sufficient
distance to the neck!
3. Now the belt has to be threaded through the
belt adjusters again. In order to ensure proper
functioning, it is imperative to adhere to the
correct path of the belt - see figure 3.
4. Finally, the previously removed belt end caps
should be clipped back onto the belt end.
Herni
IV. Using the optional accessories
• Page 15 •
fig. 1
fig. 2
fig. 3