3. Place the child seat on the vehicle seat.
4. Let your child sit down in the child seat and
check the height. Repeat this process until
the headrest (22) is at the correct height.
1.10 Using the 3-point-harness
1. Unscrew the SICT (23) counter-clockwise (on
the side closer to the vehicle door) until it is
5 mm away from the vehicle door or it is
unscrewed to the maximum.
Pull out the vehicle belt and guide it in front
of your child to the vehicle belt buckle (18) .
ATTENTION!
Make sure that the vehicle belt is
not twisted, otherwise the full protective effect
of the restraint system is not given.
2. Snap the buckle into the vehicle seat belt
buckle (18) with a CLICK.
3. Place the diagonal belt (16) and the lap belt
(15) on the side of the vehicle belt buckle
(18) in the light red belt guide (04) of the
seat cushion.
ATTENTION!
The vehicle belt buckle (18) must
not lie between the light red belt guide (04)
and the armrest.
Herni
I. General information
• Page 7 •
