HERDEGEN SNC
2, Rue Freyssinet
77500 CHELLES-FRANCE
User’s Manual-Mode d’emploi-Gebrauchsanweisung
Manuel del Usuario
07/12/2017 Rev. 1 (18/04/2018)
8
4.2. Electronic care
Inspect all wiring harnesses to make sure they are not damaged.
If damage is present, unplug the lift chair, mark it as “defect” and contact your authorized provider for service.
Keep all electronics free from moisture and temperature extremes.
Check electrical components frequently for signs of corrosion and replace if necessary.
4.3 Conditions of storage and use
Temperature
Humidity
min
max
min
max
Indoor
use only
Storage
5° C
+ 40° C
0%
80%
Use
5° C
+ 40° C
0%
80%
5. ANNUAL MAINTENANCE, REPAIR
For perfect safety and longevity of the chair, it is recommended to do the maintenance of the chair once a year by a licensed professional.
Please note, only the original components must be used to repair the chair, according to the risk of losing the manufacturer’s warranty.
Operations
Frequency
To do list
Visual inspection,
tightening and cleaning
once a month and, if
necessary
If you notice anything suspicious, contact your
authorized dealer
Metal elements
annual
Lightly grease the axis of the moving elements
Clips backrest and backrest
holders
every 3 months
Check that the backrest is correctly locked into the
seat frame.
6. DISPOSAL AND RECYCLING
This electrical lift chair is classified as a commercially used electric appliance in accordance with WEEE Guidelines 2002/96/EG (Electronics Law).
Electrical components of that chair must be disposed according to WEEE Guidelines 2002/96/EG. Make sure that components you will dispose of
are not infected. Dispose of this product in accordance with your regional waste disposal regulations.
7. TECHNICAL SPECIFICATIONS & WARRANTY
SNC HERDEGEN warrants the electrical & mechanical parts of this chair against defects to the original consumer only, for a period of two years
from the date of original purchase by a consumer. The date of purchasing will be provided to SNC HERDEGEN by its retailer. The remote control
has a 1 year warranty. SNC HERDEGEN shall not be responsible or obligated to pay for any costs or expenses for examination of any warranted
parts nor is SNC HERDEGEN to pay cost for transportation, handling and packaging of the parts or components. Please refer to SNC HERDEGEN
or your retailer with the correct information on the product. Those information can be found on the metal frame and the activator of the lift chair. The
repair is done using original components within the limit of the 2 year warranty. The defect parts must be returned to SNC HERDEGEN.
