Henny Penny Velocity OXE-100, Инструкции по эксплуатации

Страница: 53 / 118

Maintenance
41
3 3))
Remove, clean and dry the drain pan and install a new filter. Refer to 3.2 Drain Pan Assembly,
page 10 for instructions.
4 4))
Insert the drain pan under the unit until it latches.
5 5))
Press the A Ad dd d < <-- N Ne ew w button until the oil reaches the lower limit line with new oil.
6 6))
Power on the unit and return to normal operation.
7 7..6 6..4 4 F Frro on ntt B Bu ullkk O Oiill D Diissp po ossa all
This section explains the bulk oil process for draining and disposing of oil. Once the oil has degraded,
the vat is drained completely and refilled with new oil. The degraded oil is pumped in to a bulk oil
storage container using menu commands from the fryer's control board.
NOTICE :
To protect community sewer lines, oil must be trapped and disposed of
through bulk removal. Hot oil can coagulate when cooled, which clogs pipes
and sewer lines. Always dispose of oil in to an approved bulk oil disposal
storage container or approved grease trap. Never pour oil down a public
sanitation drain.
7 7..6 6..4 4..1 1 A Acccce essss tth he e D Diissp po osse e M Me en nu u
Use the following steps to access the disposal menu. An indicator light displays next to active options
during procedure.
1 1))
Press and hold the M Ma aiin n menu button until *MAIN* displays. The Main menu displays.
2 2))
Press the 1 1.. F FIIL LT TE ER R button. Additional menu items display.
3 3))
Press the M Ma aiin n menu button twice. The dispose menu displays.
7 7..6 6..4 4..2 2 F Frro on ntt D Diissp po ossa all R Re em miin nd de err -- C Co on nn ne ecctt tth he e H Ho osse e
IIN NF FO O: Rear dispose systems should always have the hose connected to the fryer, so no such
reminder displays.
If set for front disposal (hose), the control displays a reminder to connect the hose between the fryer
and the disposal cart (tank). Confirm that the hose is securely connected on both ends—at the tank
and at the fryer—then press the Y
YE ES S button to proceed.
7 7..6 6..4 4..3 3 D Drra aiin n tth he e O Oiill
Drain the oil from the vat by doing the following:
1 1))
Press the 7 7.. D DIIS SP PO OS SE E button. The message DRAIN POT? and YES NO displays.
2 2))
Press the Y YE ES S button. DRAINING displays.
3 3))
Wait. The oil from the vat drains in to the drain pan. When complete, the message =PURGE=
Pump new oil push old oil from ports displays.