Henny Penny Velocity OXE-100, Инструкции по эксплуатации

Страница: 22 / 118

Initial
Startup
10
3 3..2 2 D Drra aiin n P Pa an n A Asssse em mb bllyy
Use these steps after disassembling and cleaning the drain pan, to install a new filter and
reassemble the filtration system and pan assembly.
NOTICE
D Du urriin ng g a asssse em mb bllyy b be e ssu urre e tto o a ap pp pllyy o oiill tto o a allll O O--rriin ng gss tto o llu ub brriicca atte e a an nd d tto o
h he ellp p p prre evve en ntt tte ea arrss a an nd d o oiill llo ossss..
1 1.. Slide a filter envelope on to the filter screen so the plug
is protruding through the hole.
2 2.. Slide the two handle clamps on to the ends of the filter
screen assembly with the handles facing the plug.
3 3.. Place the filter screen in the bottom of the drain pan
with the plug side up.
4 4.. Align the hole in the pickup tube with the filter screen
plug, and then press down.
5 5.. Position the pick-up tube so that both sides of the
guides slide in to the holder bracket notches.
6 6.. Press down on the pick-up tube to confirm it is fully
engaged on the filter screen plug.
7 7.. Place the crumb catcher into the drain pan so the legs
straddle the filter screen.
8 8.. Place the lid onto drain pan.
9 9.. Push the drain pan into place and lock it into place
using the locking latch.