Henny Penny Velocity OXE-100, Инструкции по эксплуатации

Страница: 57 / 118

Maintenance
45
2 2))
Press and hold the M Ma aiin n menu button until *MAIN* displays. The Main menu displays.
3 3))
Press the 1 1.. F FIIL LT TE ER R button. Additional menu items display.
4 4))
Press the M Ma aiin n menu button twice. The 8. CLEAN-OUT menu displays.
5 5))
Press the 8 8.. C CL LE EA AN N--O OU UT T button. =CLEAN OUT= HAS OIL BEEN REMOVED? YES NO
displays.
6 6))
Press Y YE ES S. IS VAT FILLED WITH WATER & CLEANER? displays.
7 7))
Proceed to 7.7.4 Perform the Clean-Out Preparation, page 45 .
7 7..7 7..4 4 P Pe errffo orrm m tth he e C Clle ea an n--O Ou utt P Prre ep pa arra attiio on n
1 1))
Raise the lid and remove the racks and carrier, and then tilt the lid back so it is easier to clean.
2 2))
Fill the vat with warm water half way to the oil level indicators. This can be done with a 5 gallon
bucket or water hose connected to a spigot.
3 3))
Add 8 to 10 ounces of fryer cleaning solution.
4 4))
Continue to 7.7.5 Perform the Cold-Soak Clean-Out, page 45 or 7.7.6 Perform the Heated
Clean-Out, page 45 .
7 7..7 7..5 5 P Pe errffo orrm m tth he e C Co olld d--S So oa akk C Clle ea an n--O Ou utt
This procedure requires that the water stays in the vat overnight to soak off the crusty debris on the
side of the vat.
1 1))
If necessary, press the O OF FF F button to power off the unit.
2 2))
Allow the vat, filled with water and cleaner, to soak as long as necessary (overnight).
3 3))
Use a scrub brush/pad on the vat walls to loosen any crumbs or debris.
4 4))
Carefully clean the elements with a thin scrub brush.
5 5))
Scrub the underside of the lid.
6 6))
Remove and clean the lid gasket.
7 7))
When completely scrubbed clean, press the D DO ON NE E √ √ button. DONE SOAKING?, YES and NO
displays.
8 8))
Press Y YE ES S, and then press the n ne exxtt► ► button.
9 9))
Proceed to 7.7.7 Drain the Water, page 46 .
7 7..7 7..6 6 P Pe errffo orrm m tth he e H He ea atte ed d C Clle ea an n--O Ou utt
This procedure requires immediate cleaning without soaking overnight.
1 1))
If necessary, press the O ON N button to power on the unit. =CLEAN OUT= HEATING 78F x!
displays.
2 2))
WAIT. The temperature rises to 194 degrees, and then a 15:00 minute timer starts with a
beeper sounding. =CLEAN OUT= cleaning displays.
3 3))
Use a scrub brush/pad on the vat walls to loosen any crumbs or debris.
4 4))
Carefully clean the elements with a thin scrub brush.