Henny Penny Velocity OXE-100, Инструкции по эксплуатации

Страница: 113 / 118

Annual
Inspection
Checklist
Form
101
gasket if it has not been replaced in the last 12 months, or if the
gasket is hardened, brittle, damaged, or blackened.
29.
Inspect Lid Handle Rollers – Please read and follow all instruc-
tions for this step.
30.
Inspect cam slide fillers located on each side of the lid cover.
31.
Inspect front lid latch and make adjustments as necessary.
32.
Inspect pressure pads. Rotate if excessively worn, replace if
cracked or both sides are excessively worn.
33.
Manually test lid pin switch. Refer to test instructions.
34.
Check error log and address recent pressure errors.
General Fryer, ATO, and Filtration System
35.
Verify all labels are in place and legible on fryer.
1 11 1..1 1 R Re eq qu uiirre ed d T To oo ollss
Ensure you have the following tools prior to performing the annual inspection:
• Temperature probe depth gauges
• Pipe snake
• Amp clamp
• Imperial size socket set
• Imperial size set of hex key wrenches
•
Full range pliers set, from needle nose to 12” large slip joint
•
Phillips and flat blade screwdriver set
•
Pipe wrenches 8–12”
•
Wire stripping tool
• Wire cutter
• Crimping tool
• Adjustable wrench set 8–12”
• Open end wrench set (imperial sizes)
1 11 1..2 2 R Re eq qu uiirre ed d P Pa arrttss
Ensure you have the following parts prior to performing the annual inspection:
•
Safety relief valve (one per fryer)
•
Lid cables
•
Pressure pads