229
4.
Assembly
Configurations
-
Drawing 1
Assembly 1: Wiring Diagram
To achieve successful operation at a minimum, ensure the ports below are properly connected.
Software: Basic Settings
1.Set the needed working modes of the unit via the menu
H.2.
If no heating curve is desired:
3.Locate and activate the buffer tank and appropriate pumps under
H.1.
Setting a heating curve:
H.
Configuring the set water heating temperatures:
2.Temperature configuration options for Heating/Cooling circuit 1 are found under
C.Configuring the set water cooling temperature (if applicable):
TO OUTDOOR
UNIT's Anti-freeze heater
(for monolock units)
TO OUTDOOR
UNIT POWER SUPPLY
(For split units)
