8.04) Language
Set
system
language
.
8.05) Set Date and Time
Set
system clock date and time.
8.06)
Distribution
System
Setting
The
unit
is
default
set
to
have 3-way
motorized
valve
inside
the
unit
,
which
has
different
flow
directions
for
sanitary
hot
water
/
cooling
+
heating
mode
.
If
user
needs
to
have
sanitary
hot
water
and
heating
on
the
same distribution system, he can
set this parameter to
“
Hot Water+Heating/Cooling
”.
Note: If it is set to "Sanitary Hot Water+Heating/Cooling", temperature sensor for sanitary hot
water (Tw) will be used for the control of heating operation also. Please place it either inside an
ideal position in Hot Water Tank.
8.07) Save Current Settings
This
parameter
is
used
by
installer
to
save
the
current
settings
as
“
Installer Settings
”,
so
the
customer
can
load
the
saved
settings
into
the
system
,
when
needed
.
8.08) Load Saved Settings
Loaded
the
saved
“
Installer Settings
”.
8.09) Reset to Factory Settings
Reset
the
whole
system
back
to
factory
default
settings
.
Note
:
Saved
“
Installer Settings”
will
be
cleared
.
Note: Most of above menus and parameters are designed for installer only. They should only be adjusted
by installer or professional customer under the instruction of installer, otherwise malfunction of the unit
may happen.
8
80
7. Operation Instruction
