447
5. Installation Walkthrough
5.3. Indoor Unit Installation
5.3.1. Choosing an installation location
A. The indoor unit can be located in a room, corridor, balcony, garage or warehouse.
B. Indoor unit should be placed on flat and solid ground.
C. The unit is recommended to be put in a space close to water supply, and drainage.
D. The outdoor and indoor unit should be placed close, to save the copper tube as well as the
energy.
E. The indoor unit shall be placed in dry and well-ventilated environment.
F. Indoor unit mustn't be installed in an environment where volatile, corrosive or flammable
liquid or gas exists.
G. During the movement, please be careful to keep the unit vertically. If the unit is tilted by
30
°
, it may fall down and cause damage to itself or the porter.
H.
I. Enough space should be left around the indoor unit for futher maintenance.
Don't expose the operation panel under direct sunshine.
>500mm
>500mm
>500mm
