HEIDENHAIN TNC 640, Руководство пользователя, Страница: 99 / 948

Introduction | Status displays
2
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
99
Icon Meaning
The function for traversing in the tool-axis direction
is active
No program selected, program reselected,
program aborted via internal stop or program
terminated
In this condition the control has no modally effec-
tive program information (i.e. the contextual refer-
ence), so that all handling is possible, e.g. cursor
movements or modification of Q parameters.
Program started, execution runs
For safety reasons, the control permits no handling
in this condition
Program stopped, e.g. in operating mode
Program
run, full sequence
after pressing the
NC stop
key
For safety reasons, the control permits no handling
in this condition
Program interrupted, e.g. in operating mode
Positioning w/ Manual Data Input
following the
error-free execution of an NC block
In this condition the control permits various
handling, e.g. cursor movements or the modifi-
cation of Q parameters. With this handling the
control may lose the modally effective program
information (i.e. the contextual reference). Loss
of this contextual reference may cause undesired
tool positions!
Further information: "Programming and execut-
ing simple machining operations", page 798 and
"Program-controlled interruptions", page 826
Program aborted or terminated
Turning mode is active
The Dynamic Collision Monitoring function (DCM)
is active (option 40)
The Adaptive Feed Control function (AFC) is active
in teach-in cut mode (option 45)
The Adaptive Feed Control function (AFC) is active
in closed-loop mode (option 45)
The Active Chatter Control (ACC) function is active
(option number 145)
Pulsing spindle speed function is active
The order of icons can be changed with the optional
machine parameter
iconPrioList
(no. 100813). The
control-in-operation symbol and the DCM icon (option
40) are always visible and cannot be configured.