HEIDENHAIN TNC 640, Руководство пользователя, Страница: 725 / 948

Manual Operation and Setup | Moving the machine axes
17
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
725
NOTICE
Caution: Danger to the tool and workpiece!
The wireless handwheel triggers an emergency stop reaction
if the radio transmission is interrupted, the battery is fully
empty, or if there is a defect. Emergency stop reactions during
machining can cause damage to the tool or workpiece.
Place the handwheel in the handwheel holder when it is not
in use
Keep the distance between the handwheel and the
handwheel holder small (pay attention to the vibration alarm)
Test the handwheel before machining
If the control has triggered an emergency stop you must reactivate
the handwheel. Proceed as follows:
Press the
MOD
key to select the MOD function
Select
Machine settings
Press the
SET UP WIRELESS HANDWHEEL
soft
key
Click the
Start handwheel
button to reactivate
the wireless handwheel
To save the configuration and exit the
configuration menu, press
END
The
MOD
operating mode includes a function for commissioning
and configuring the handwheel.
Further information: "Configuring the HR 550FS wireless
handwheel", page 877