manualshive.com logo in svg

HEIDENHAIN TNC 640, Руководство пользователя, Страница: 624 / 948

Поделиться
Скачать
HEIDENHAIN TNC 640 Скачать руководство пользователя страница 624

Multiple-Axis Machining | Miscellaneous functions for rotary axes

 

13

 

624

HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017

Compensating the machine kinematics in ACTUAL/
NOMINAL positions at end of block: M144 (option 9)

Standard behavior

If the kinematics change, e.g. by inserting a spindle attachment
or entering an inclination angle, the control does not compensate
this modification. If the operator does not take this modification to
the kinematics into account in the NC program, offset machining is
executed.

Behavior with M144

Refer to your machine manual.

The machine geometry must be specified by the
machine tool builder in the description of kinematics.

The 

M144

 function enables the control to consider the modification

to the machine kinematics in the position display and compensate
the offset of the tool tip in relation to the workpiece.

Programming and operating notes:

Positioning blocks with 

M91

 or 

M92

 are permitted

while 

M144

 is active.

The position display in the 

Program Run Full

Sequence

 and 

Program Run Single Block

 operating

modes does not change until the tilting axes have
reached their final position.

Effect

M144

 becomes effective at the start of the block. 

M144

 does not

work in connection with 

M128

 or the Tilt Working Plane function.

You can cancel 

M144

 by programming 

M145

.

Содержание TNC 640





















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов