HEIDENHAIN TNC 640, Руководство пользователя, Страница: 398 / 948

Programming Q Parameters | Additional functions
10
398
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
In the NC program, program FN 16: F-PRINT to activate the
output:
Enter the path of the source and the path of the output file in the
FN 16 function .
Specify the output file containing the output texts within the
function
FN16
. The control generates the output file at the end of
program (
END PGM
), at program abortion (
NC-STOPP
key) or via
M_CLOSE
command.
If you only specify the file name as the path name of
the log file, then the control saves the log file in the
directory of the NC program with the
FN16
function.
Program relative paths as an alternative to complete
paths:
Starting from the folder of the calling file one folder
level down
FN 16: F-PRINT MASKE\MASKE1.A/
PROT\PROT1.TXT
Starting from the folder of calling file one folder level
up and in another folder
FN 16: F-PRINT ..\MASKE
\MASKE1.A/ ..\PROT1.TXT
Example
96 FN 16: F-PRINT TNC:\MASK\MASK1.A/ TNC:\PROT1.TXT
The control then creates the file PROT1.TXT:
MEASURING LOG OF IMPELLER CENTER OF GRAVITY
DATE: July 15, 2015
TIME: 8:56:34 AM
NO. OF MEASURED VALUES : = 1
X1 = 149.360
Y1 = 25.509
Z1 = 37.000