HEIDENHAIN TNC 640, Руководство пользователя, Страница: 215 / 948

Programming Aids | Calculator
5
HEIDENHAIN | TNC 640 | Conversational Programming User's Manual | 10/2017
215
Calculate function Shortcut (soft key)
Truncate decimal places INT
Truncate places before the decimal
point FRAC
Modulus operator MOD
Select view View
Delete value CE
Unit of measure MM or INCH
Show angle values in radians
(standard: angle in degrees) RAD
Select the display mode of the numeri-
cal value DEC (decimal) or HEX
(hexadecimal)
Transferring the calculated value into the program
Use the arrow keys to select the word into which the calculated
value is to be transferred
Superimpose the on-line calculator by pressing the
CALC
key
and perform the desired calculation
Press the
CONFIRM VALUE
soft key
The control transfers the value into the active input field and
closes the calculator.
You can also transfer values from an NC
program into the calculator. When you press the
GET CURRENT VALUE
soft key or the
GOTO
key, the
control transfers the value from the active input field to
the calculator.
The calculator remains in effect even after a change in
operating modes. Press the
END
soft key to close the
calculator.