Heath Consultants HPN105354 Скачать руководство пользователя страница 66 | Manualshive

Страница: 66 / 69

background image

Doc No. 105408 Rev C, RMLD-CS Operator Manual

RMLD-CS

Operator’s Manual

Manual

© 2021 Heath Consultants Incorporated. All rights

reserved.

65

Warranty and Repair

All instruments and products manufactured by Heath Consultants Incorporated are warranted to be free
from defects in material and workmanship for one (1) year from the date of shipment.
Furthermore, the warranty on authorized repairs in the Houston Factory Service Center (FSC) and other
regions is ninety (90) days materials and thirty (30) days labor. This repair warranty does not extend any
other applicable warranties.
Our warranty covers only failures due to defects in materials or workmanship which occur during normal
use. It does not cover failure due to damage which occurs in shipment, unless due to improper packing, or
failures which result from accident, misuse, abuse, neglect, mishandling, misapplication, alteration,
modification, or service by anyone other than a Heath warranty repair location.
Batteries and damage from battery leakage and all expendable items such as filters and tubing are
excluded from this warranty.

Heath’s resp

onsibility is expressly limited to repair or replacement of any defective part, provided the

product is returned to an authorized warranty repair location, shipped prepaid, and adequately
insured. Return shipping charges and insurance will be paid by Heath warranty expense.
We do not assume liability for indirect or consequential damage or loss of any nature in connection with
the use of any Heath product. There are no other warranties expressed, implied, or written except as listed
above.

Heath warrants only that the parts manufactured by it will be as specified and free of defects. Heath
makes no other warranties or representations of any kind whatsoever, express or implied, and any and all
implied warranties including any warranty of merchantability and fitness for a particular purpose or use
are hereby disclaimed.

«
...
64
65
66
67
68
...
»

Содержание HPN105354






































































Отзывы:

Нет отзывов

Похожие инструкции для HPN105354

Бренд: logika Страницы: 20

Бренд: Valentine Страницы: 7

Бренд: Draper Страницы: 12

Бренд: Macurco Страницы: 11

Бренд: Draper Страницы: 16

Бренд: BEINAT Страницы: 8

Бренд: Levenhuk Страницы: 18

Бренд: Uniden Страницы: 26

Бренд: Fisher Labs Страницы: 32

Бренд: Velleman Страницы: 33

Бренд: Uniden Страницы: 2

Бренд: Emerson Страницы: 2

Бренд: Kane Страницы: 4

Бренд: Beltronics Страницы: 12

Бренд: Sensitron Страницы: 14

Бренд: GST Страницы: 13

Бренд: American Radar Страницы: 24

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды