heatapp! T2B, Инструкция по эксплуатации

Страница: 80 / 135

Functions of the room- and radio components
S. 80
After registration, attach the heatapp! sense control to the wall mounting plate.
After registration, attach the heatapp! sense control to the wall mounting plate.
Fig.: 59: Attaching the heatapp! sense control to the wall mounting plate and battery change
To change the battery, carefully remove the heatapp! sense control from the wall plate using a screwdriver.
11.4.4 Excluding
If deregistration is started on the heatapp! gateway, then menu 03:02, selection 2 must be saved on the heatapp! sense control.
Fig.: 60: Excluding of the heatapp! sense control
11.4.5 Basic display
In the basic display, the top row shows the actual desired temperature and bottom row shows the actual temperature with the
thermometer shelter icon.
11.4.6 Display – symbols
Info Menu Info
Prog Menu program
Pause

Z-wave communication interrupted

The device is not properly registered
Hand
No operation possible. If the hand symbol remains displayed for a longer period,
please remove and reinsert the battery.
Maintenance (service spanner) Registering/Deregistering in progress
Frame around the operating area Processing and sending settings
11.4.7 + and – Taste
Pressing the + or - key adjusts the desired temperature up or down. During input, the desired temperature is displayed inside a
frame. After transfer of the setting to the gateway, the frame disappears again.
The desired temperature set in the heatapp! sense control is a temporary adjustment. It is valid only until the next switching
time, as a minimum, however, for the time set in expert mode.