heatapp! T2B, Инструкция по эксплуатации

Страница: 8 / 135

Safety
S. 8
1.3 Intended use
The device or system is intended solely for the use described in the section "System description", with supplied and approved
components.
Any other use is classified as an improper use. The manufacturer shall not be liable for any damage resulting from this. The
user/operator is solely responsible for the risk.
Observance of the information contained in the operating instructions forms part of the intended use.
Hazards can arise from the system if it is not used as intended.
1.4 Personnel qualifications
The electrical installation, initial operation and servicing of the device may only be performed by qualified electrical technicians
who have been authorised by the operator.
The technicians must have read and understood these operating instructions and follow their procedures.
Requirements to be met by a qualified electrical technician:
• Knowledge of general and special safety and accident prevention regulations.
• Knowledge of the relevant electrical regulations (e.g. DIN VDE 0100 Part 600, DIN VDE 0100-722) plus the relevant
national regulations.
• Ability to identify risks and avoid possible hazards.
1.5 Warranty conditions
Improper use, non-observation of these instructions, use of inadequately qualified personnel and independent changes exclude
any liability on the part of the manufacturer for the resulting damage. The manufacturer's warranty becomes void.
ATTENTION
Impairment of device function if incorrect spare parts are used!
If unauthorised parts are used correct functioning is not assured. Use spare parts authorised by customer service.
1.6 Safety instructions

The device is not suitable for children and must not be used as a toy.

Store packaging material safely away from children or dispose of it.

Do not dismantle the device; it does not contain any user-serviceable parts. If defects occur, please contact your
installer.