heat-timer ETV Platinum Plus, Инструкция по установке и эксплуатации

Страница: 23 / 56

059305-00 Rev. D
Heat-Timer Corp.
NOTE:
The ETV Platinum Plus can only provide 24Vac power to a single Actuator. An external 24V
transformer kit is required to provide power to the second Actuator. The external 24V is provided
when a valve/actuator kit is order ed.
3. To connect 24Vac power from the ETV Platinum Plus to the first Actuator:
a. Run the Actuator’s power wires through a knockout located on the bottom of the ETV Platinum Plus
enclosure.
b. Connect the Actuator power wire from Actuator terminal (L1) to terminal 4 on the ETV Platinum Plus.
c. Connect the Actuator power wire from Actuator terminal (Ln) to terminal 5 on the ETV Platinum Plus.
4. To connect 24Vac power from the External Transformer Kit to the second Actuator:
a. Connect the second Actuator’s (L1) and (Ln) terminals to the transformer’s 24Vac terminals.
Wiring Optional TMC Safety Valve - Solenoid Valve (supplied by others)
NOTE: The ETV Platinum Plus does not source power to the TMC
valve terminals. An external power source is required and must
be connected in series as shown in the diagram. Refer to “TMC
Valve” on page 6 for information.
1. Run the TMC valve wire and the external power source wire
through knockouts located on the bottom of the ETV Platinum
Plus enclosure.
2. To connect a N.O. TMC valve:
a. Connect the TMC valve wire to terminal 12 on the ETV Platinum Plus.
b. Connect the external power source wire to terminal 11 on the ETV Platinum Plus.
c. Connect the other Solenoid wire to the external power source.
3. To connect a N.C. TMC valve:
a. Connect the TMC valve wire to terminal 13 on the ETV Platinum Plus.
b. Connect the external power source wire to terminal 12 on the ETV Platinum Plus.
c. Connect the other Solenoid wire to the external power source.
Wiring Optional TMC Safety Valve - Motorized Ball Valve (supplied by Heat-Timer)
NOTE: The Motorized Ball Valve used as a TMC Safety Valve requires an external 24V transformer
that is provide with the Motorized Balll valve. For mounting of the external 24V transformer
reference the Motorized Ball Valve installation manual - 059434-00
Installation Instructions 23