heat-timer ETV Platinum Plus, Инструкция по установке и эксплуатации

Страница: 16 / 56

059305-00 Rev. D Heat-Timer Corp.
2. Mount the Actuator to the valve by sliding the valve stem groove into the Actuator U-channel
as shown in
Figure 8. If necessary, use the Actuator manual tab to adjust the position of the U-channel until it is
aligned with the valve stem groove.
NOTE: The U-bolt must also be aligned with the valve groove, as shown in Figure 8. If necessary use the
actuator manual tab to adjust the position of the actuator frame and mounting holes to align the U-bolt
with the valve body groove.
1
Switch from Auto
to Manual
2 Manual
Operation
3
Switch from Manual
to Auto
Lower Tab
Turn tab to
manually raise or
lower the acuator
Lift Tab
16 ETV Platinum Plus Installation and Operation Manual
Figure 7: Manually closing the actuator