33
ROOF PANELS
x4
2" (5,1 cm)
PARTS REQUIRED:
Roof panels may cause serious injury until securely fastened.
Install all roof panels with the rough side facing up (painted grid lines side).
48"x 96"
3/4" GAUGE
BLOCK
GAA
Rafter
Roof Panel
Gable Panel
Fig. C
1/2"
(1,3 cm)
Move to the opposite end.
Using the long edge of the panel as a lever,
move the panel side-to-side until the top
corner is flush at the peak
(Fig. B)
,
Adjust the back gable panel for the 1/2"
measurement
(Fig. C)
.
Secure panel with (2) 2" nails in the corners.
7/16 x 48 x 96"
(1,1 x 121,9 x 243,8 cm)
x1
2
1
BEGIN
Install the
48 x 96"
panel first.
Use the gauge block to ensure the
3/4" measurement on the rafter
(Fig A)
, and that the panel is flush at
the peak
(Fig. B)
.
Secure the panel with (2) 2" nails in
the corners.
2 Nails
2 Nails
Fig. A
3/4"
(1,9 cm)
Gauge
Block
Flush
at peak
Fig. B
Flush
at peak
Fig. B