background image

 8’ x 6’ Overlap Apex Shed

Fixing Pack (OPA68ONFP)

This fixing pack is used for several products. 
There may be additional fixings.

Not to Scale

Important : 

Assembly of this 

shed requires a 

minimum of two 

adults.

MUST PRE-DRILL

Issue 0115

B

OPA6PE

PLAIN END 

OPA8WS

WINDOW PANEL 

OPA8PS

PLAIN PANEL 

ORS1X14

ROOF SHEET

 QTY 4

C

D

E

G

 L

F

45452275PT

2275mm BATTEN QTY 4

FIN20010512PTR

FINIAL
 QTY 1

A

OPA68ON PARTS LIST

1

4

BRDFL46

 FLOOR QTY 2 

SDRPT

DOOR QTY 1 

OPA6DE

DOOR END 

44161570PT

1570mm  CORNER STRIP QTY 4

M

P

Q

K

Top View

2

D

C

Z’ bracket Qty 8

30mm Screw Qty 17

50mm Screw Qty 66

25mm Screw Qty 33

45120675PPT

675mm STRIP QTY 1

N

PCWIN1

WINDOW QTY 2

The windows are packed together 

tightly, separate before assembly.

75121110PAII62PT

1110mm ANGLED BARGE BOARD QTY 4

20121695PT

20 x 1695mm STRIP QTY 1

O

84996

675mm PLASTIC STRIP QTY 4

R

Fix both of the floors together using 2x50mm 
screws screwing through the floor bearers as 
shown.

Place the panels on top of the completed floor. Make sure that all the panels are 
tight and flush before fixing them to each other using 3x50mm screws.

When the panels are secured to each other, make sure they are square and fix 
them to the floor using 3x50mm screws for each panel. Make sure the screws are 
positioned so that they locate into the bearers underneath.

 

Fix the 20 x 1695mm strip to the side 
of the door frame so that it is tight 
with the cladding and flush with the 
frame. Use 3 x 30mm screws.

3

O

Flush Hinge 

Qty 2

Hasp & 

Staple

C

B

A

E

D

M

Q

5

Place the corner strips so that they cover the joins between 
the panels. Fix each in place using 3x30mm screws.

40mm Screw Qty 12

A

F

 

IMPORTANT, RETAIN FOR FUTURE REFERENCE; READ 

CAREFULLY

This building is pressure treated to ensure longevity of all 
timber components and to protect against rot. This may leave 
a colour difference on some parts that will even out as the 
moisture content stabilises. This will not need additional 
treatment.

- This product must be built on a solid level base.
- The roof of this building is not a load bearing structure.
- Please keep all plastic bags and small parts away from 
children
- Timber is a natural material. It will shrink and swell as a 
result of varying moisture content.
- Due to the nature of the material the doors may need some 
trimming for a neater fit.

Technical Help line:

 0333 7777 089

  8.30 am and 5.00 

pm  Monday to Friday.

Please check all parts prior to assembly

Assembly of damaged parts may be deemed to be 
acceptance and this may affect the remedies you are entitled 
to. 
If the product is not constructed in accordance with the 
instructions, or is altered in any way (e.g. painted), the 
manufacturer cannot be held liable for any resulting damage.

25mm Security Screws

Screws Qty 12

REQUIRED TOOLS : 
(NOT SUPPLIED)

POZI DRIVE 

SCREWDRIVER

TAPE MEASURE

HAMMER

SHARP KNIFE

FLAT HEAD 

SCREWDRIVER

SCISSORS

Place the hinge against the inside of the door frame and position the large section of the hinge so 
that it is flush with the inside of the framing as shown and fix with 25mm screws.

Open the hinge and fix the smaller section to the door framing. Again make sure that the hinge is 
flush and that the holes are positioned so that the 25mm screws locate correctly into the batten.

 

H

ORS1X520

ROOF SHEET

 QTY 2

 I

VG1010

VERGE (apex)

 QTY 2

 J

VG505

VERGE (apex)

 QTY 1

Hats Qty 40

Отзывы: