25
DO
OR
DO
OR
GABLE WALL INSTALLATION
3" (7,6 cm)
x12
2" (5,1 cm)
x27
PARTS REQUIRED:
1-1/2"
(3,8 cm)
Center back gable wall on the fl oor.
Ensure 1-1/2" measurement is at the top.
BEGIN
1
Do not nail
in groove.
2
Secure wall with (1) 2" screw into side wall
bottom plate
(Fig. A)
and top plate
(Fig. B)
.
Secure wall to bottom plate fi rst.
Nail lower edge of panels to fl oor with 2" nails
spaced 6" apart.
Angle nails into the fl oor frame
(Fig. C)
.
Secure wall bottom plates to fl oor with 3" nails
(Fig. C)
.
Nail panel to side wall stud with 1-1/2" nails
spaced 6" apart..
ENSURE PANEL CORNERS ARE FLUSH.
Your back gable wall is now installed.
FINISH
1-1/2" (3,8 cm)
x13
2" (5,1 cm)
x2
2" (5,1 cm)
Nails
1-1/2" (3,8 cm)
Nails
Flush
6"
(15,2 cm)
6"
(15,2 cm)
2" (5,1 cm)
Screw
Fig. B
2" (5,1 cm)
Screw
Fig. A
Nail 2" nails fi rst.
2" (5,1 cm)
Nails
3" (7,6 cm)
Nails
Fig. C
Secure wall top plate with (1) 3" screw
at the corner at an angle,
as shown in
(Fig. D)
.
3
3" (7,6 cm)
Screw
Fig. D
3" (7,6 cm)
Nails
3" (7,6 cm)
x1
