3
FOUNDATION OR FLOOR MATERIALS
ADDITIONAL MATERIALS
REINFORCED WOOD FLOOR FRAME (OPTIONAL)
IMPORTANT! Depending on your specific use you may want to construct a heavy duty floor frame by adding additional floor joists
(shown below as shaded). Below is a list of additional materials (not included):
Hot Dipped Galvanized Box-Type Nails.
3" (7,6 cm)
x40
Use only wood treated for ground contact and fasteners approved for use with treated wood.
WOOD FLOOR FRAME (Not Included)
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm)
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm)
cut to 2 x 4 x 141" (5,1 x 10,2 x 358,1 cm)
MATERIAL REQUIRED:
x2
x10
Optional 12" (30,5 cm) spacing
Standard 16" (40,6 cm) spacing
x3
x12
2 x 4 x 12' (5,1 x 10,2 x 365,8 cm) Treated Lumber
cut to 2 x 4 x 141" (5,1 x 10,2 x 358,1 cm)
3" (7,6 cm) hot-dipped galvanized nails
• If your shed came with a separate floor kit, then please use the instructions supplied with that kit to assemble your floor.
• See the FLOOR LEVELING section on page 11 for recommended methods and suggested materials to properly level your floor,
as this will vary depending on your specific site.
• If you will be building your own floor, below are the materials that you'll need.
