Section 5
MLSM2003-09-03
10
Procedure B
- Timer Replacement
Step 1: For oven to operate, time of
day must be set in timer. See Timer
Programming (Procedure C) for
details.
Step 2: Disconnect power supply to
range. Pull range away from wall
and remove backguard. See Proce-
dure A Step 1.
Step 3: Prop Top Up. See Proce-
dure P.
Step 3: Remove 4 screws holding
timer to control panel and transfer
wires to new clock.
Step 4: Disconnect coaxial power
supply cable by lifting both locking
tabs.
Step 5: Disconnect two molex
plugs from clock. Please note that
clock has specific markings for
each molex plug: a) solenoid door
“lock” has a smooth grey wire and
is attached to the left side of the
clock and b) oven “probe” with high
temperature shield is connected to
the right side of the clock.
Note: If these wires a reversed,
code F1 will be display as soon as
any cooking function is selected.
Step 6: Transfer all wires to the
new timer in the exact same loca-
tion.
Note: When re-attaching the coaxial
computer cable, please ensure it is
fully inserted and that both locking
tabs are securely engaged.
