©
HDG Bavaria GmbH 06/2008
HDG Euro V3.0 with HDG Lambda Control 1 - V 1 - en
4 Using the HDG Euro – Overview of the controls and display components
21
4 Using the HDG Euro
4.1 Overview of the controls and display
components
Control panel HDG Lambda Control 1
1 “Heat production on” indicator
2 “Reload” indicator
3 “Fault” indicator
4 Text display
5 “Heat production on/plus” button
6 “Heat production off/minus” button
7 “Arrow” button
8 “Reload” button
9 Unlocking knob for the safety temperature limiter (STB)
The HDG Lambda Control 1 control panel is located on the top of the
HDG Euro V3.0 with HDG Lambda Control 1.
Using the control panel, you can regulate the HDG Lambda Control 1
system and call up information on the current operating status.
Display
The display shows the selected information and settings. In the
operating mode “Heat production on”, the display is switched on
and active. In the operating mode “Heat production off”, the display
switches off after 15 minutes. It can be switched on again by pressing
any button.
✎
In section “4.3 Structure of the menus” in this chapter, all
selectable information and parameters are listed.
“Heat production on”
indicator
The “
Heat production
on
” indicator (1) lights up when the
combustion process is started by pressing the “
Heat production
on
”
button (5), or when the process starts automatically (if the flue gas
Figure 4/1 - Control panel for HDG Lambda Control 1
7
6
5
8
9
1
2
3
4
Содержание Euro V3.0
Страница 1: ...hdg bavaria com HDG Euro V3 0 with HDG Lambda Control 1 Operation Manual V 01 06 2008 ...
Страница 2: ......