HBM Genesis ISOBE5600, Руководство пользователя

Страница: 85 / 128

CAUTION
Before starting a calibration or verification, it is recommended that the
ISOBE5600 system and the calibration standards run at least one hour to
achieve the best test specifications.
6.2.2 Starting the Verification test
When selecting bandwidth testing; there are now optional tests that can be
performed based on the depth of information required.
The basic Bandwidth test is performed by default and will calculate only the
-
3 db bandwidth value.
Figure 6.3: Board Verification window (Bandwith tests)
A Full Bandwith Selecting the Full check box:
This test is longer than the quick bandwidth test. It tests more input values
to give a better picture of the bandwidth curve before and after the
-
3db
value, A separate log file is produced.
B Mil standard Selecting the Mil itary standard check box:
This will test all DC Gain input ranges possible and takes the most time.
When selecting
Mil you will have the option to select the report to save and
display as a pre or post Cal ibration, these will then be separate files.
ISOBE5600
I2716-4.0 en 85