HBM Genesis ISOBE5600, Руководство пользователя

Страница: 6 / 128

4.5 Supported/Required calibrators 52
4.6 Calibration system setup 53
4.7 Installing the software 55
4.8 Starting ISOBE5600 Calibration and Verification 56
4.8.1 Start the ISOBE5600 Calibration and Verification software 56
4.8.2 Organization information 58
4.8.3 Mainframe selection 60
4.8.4 Transmitter/Receiver selection 62
4.8.5 CalStack setup 63
4.8.6 Exit the ISOBE5600 Calibration and Verification software 66
5 Calibration 67
5.1 Introduction 67
5.2 Calibrating 68
5.2.1 Starting the calibration 68
5.2.2 DC Calibration 72
5.2.3 AC Calibration (depending on device) 74
5.2.4 Calibration test results 79
Passed test results 80
Failed test results 80
6 Calibration Verification 82
6.1 Introduction 82
6.2 Verifying 83
6.2.1 Setting up the Verification test 83
6.2.2 Starting the Verification test 85
6.2.3 During Verification Testing 87
6.2.4 Verification test results 90
Passed test results 91
Failed test results 91
Save results 92
7 Theory of Operation 93
7.1 DC Gain (Voltage or Current) Test 93
7.1.1 The MIL (Military) standard test 94
7.2 AC Coupling Test 95
7.3 Bandwidth Test 96
7.3.1 Quick Bandwidth Test 96
7.3.2 Full Bandwidth test 97
7.4 Noise Test 99
ISOBE5600
6 I2716-4.0 en