HBM Genesis ISOBE5600, Руководство пользователя

Страница: 65 / 128

In the Board Calibration or Board Verification window:
2 Click Set up CalStack... to open the CalStack Setup window.
The CalStack Setup window will be displayed.
Figure 4.13: CalStack Setup window
Ensure that:
l
The IEEE address for each component in the equipment list matches the
actual device address of that component.
And, if you are using the IOtech Serial/IEEE488:
l
The COM port of the IOtech Serial/IEEE488 controller matches the settings
of your IOtech configuration.
For details, please refer to the IOtech specifications.
3 Click OK to save the changes you have made to the CalStack definition.
If you want to exit the CalStack setup, click Cancel .
For a few seconds the ISOBE5600 Calibration and Verification software will
attempt to communicate with the instruments in the CalStack.
ISOBE5600
I2716-4.0 en 65