Back
- Touch this button to go back to the previous set of configurable items.
As you are using Quick Edit, you will notice that at the end of each pathway, a Home button and
a back arrow will appear. If you are finished making changes, press the Home button and then
press the Save button to save your configuration. If you would like to make more changes to the
same device, press the back arrow. This will take you back to the last screen of configurable items
for that device. If you would like to continue to make changes, but to a different device, press the
Home button and then follow the pathway to the new device. The following pages will explain each
configuration pathway.
Begin Using Quick Edit
From the Quick Main Menu Screen, select one of the following buttons and follow the directions on
the next page to configure your equipment.
•
Bodies of Water
•
Backyard
•
Sensors
•
Interlocks/Add Interlock
•
System Options
•
Spa Side
If Bodies of Water is selected:
Select the body of water -
Select the Body of Water that you would like to make changes to.
Both bodies of water will have the same equipment options for Quick Edit.
Body of Water is selected:
Select the Equipment that you would like to configure -
The options are as follows:
Filter Pumps, Heaters, Chemistry, Cleaners, Water Features, Standalone Lights, Accessories,
and Other Options. If the equipment is not already configured, then the buttons will appear as
Add Heater, Add Chemistry, etc. When the button is pressed with the word “Add” before it, then
you will be taken through the full configuration for that equipment as appears in the Configura-
tion Wizard portion of this manual. Otherwise:
If FIlter Pumps is selected:
Select a Filter Pump -
Once you select a filter pump, all of the options for that filter
pump will appear on the next screen. These options are as follows:
Name -
Rename the Filter Pump to whatever name you desire.
Type -
Change the type of Filter Pump that is configured (Single Speed, 2-Speed,
or VSP)
HUA -
Match the HUA (Hayward Unique Address) to the configured Filter Pump.
This option only appears if the Filter Pump is configured as a Variable Speed
Pump.
USE ONLY HAYWARD GENUINE REPLACEMENT PARTS
50